Landscape Lighting Hub Method
Halogen bulbs used for low voltage landscape lighting must receive between 108 12 volts ac from the transformer in order to burn properly and not decrease the. However it is recommended that this type of.
The right landscape lighting can enhance the trees shrubs flowers or other features in your yard and provide security along a walkway or around a deck.
Landscape lighting hub method. This means less maintenance less lamp outages and easier troubleshooting. The only person who it might not be advantageous for is the contractor or installer. These wires are then connected together along with a wire from the power supply to send power to all the fixtures in the hub.
Not being able to relocate a fixture due to changes in the landscape landscape growth changing landscape features. It is much easier to cut corners using daisy chaining than it is with a hub. The hub method in all respects is superior to the daisy chain method.
The hub method also requires fewer wire connections which helps to eliminate possible wiring problems. The hub method describes the technique of connecting all lights in a region to each other. The illustration below shows a the t method.
This manual will take you through fixture choice bulb selection wire sizing fixture installation using the hub method transformer selection and a reference section. This method does a much better job of providing voltage to all the fixtures. The fixture wires converge in a place called the hub.
Utilizing the hub installation method will reduce the number of connections by up to 80 versus standard wiring methods. In the past most landscape lighting systems were designed with a daisy chain method. This project guide will show you how to install low voltage landscape lighting and solar powered lights.
This guide also gives an outline of what is involved in installing line voltage lighting. The hub method for wiring low voltage landscape lights has several advantages over traditional wiring methods such as daisy chaining since it allows installers a greater ability to balance the voltage to each light. There are a few types of hub connectors designed for this purpose.
The hub method is the best way to wire because it delivers proper voltage to each lamp. In addition the hub method utilizes less wire and saves money. Flexibility is essential as landscape continues to grow and change over time.
Probably the most used landscape lighting wiring method is the center fed commomly known as the t method. When a landscape is designed attention is focused on highlighting the architecture dividing public areas from the private ones creating unity flow safety and harmony between the different elements used whether its plants or hard scape.